Car #: Yours?
Year : will race 4 food Posts: 575
Anybody have a spare diff nose / case / whatever you wanna call it? Doing a swap and just need the rear end case for the PPF mounts... I'll be using an RX7 gear, limited slip and aluminum case, just need the steel nose section so I can use the PPF and save the time/effort of engineering diff and trans mounts.
Cheaper the better, or maybe we can trade some other parts around? I've got a couple 1.6 and 1.8 heads/engines that are unmolested along with a lot of other odds and ends...but of course I've sold every last diff I've had! PM or email me, chris -at- taylorrotorsports.com
Car #: na
Year : 89 Posts: 441
The 1.8 third member '94 and up to about '05 will take the Rx7 (2nd gen non turbo) limited slip diff. The gears will have to be '84-'85 Rx7 as the pinion is too long on the 2nd gen to fit into 3rd member. You can use the '84-'85 limited slip diff if you cut the retaining ring groove for the axles.
Car #: 90
Year : 91 Posts: 459
Chris, I have a spare iron section, call me at the shop tomorrow.
-------------------- Steve and Becca Bertok #90 SM 2008/2009 Carolina Cup Pro Series SM champions. 2010 VIR 13 hour enduro victorious! www.panicmotorsports.com Need a salvage Miata part? We've got that!