Region: NW/OR
Car #: 04
Year : 90 Posts: 1765
Status: Offline
posted
Karl,
I have front and rear uprights for you, cheap.
They have hubs in them but they might be rusty. I had meant to pull the front and repack it, then I'll know for sure if its good. I'd replace the rear.
I am looking for a ultrashield spec miata seat or similar in 15 1/2 or 16 inch size. Must have padding and no wrap around chest things as I want to use in my street car and be resonably easy to get in and out of. I also might be interested in last years cold air intake if the price is right such as under $100 for a Racing Beat. Thanks, Donn Snyder
Region: Oregon
Car #: 68
Year : 91 Posts: 2359
Status: Offline
posted
Racing Beat intake here
-Bruce
-------------------- Bruce Wilson 2010 Oregon Region Champ 2010 Monte Shelton Driver of the Year 2010 25 Hours of Thunderhill E3 and Under 2 liter Overall Champion Oregon Region SM Class Advisor
Region: NWR
Car #: 77
Year : 1990 Posts: 24
Status: Offline
posted
Anyone have a rear bumper they'd be willing to sell? My mother had a little too much fun with my new project at PIR the other day. any help would be appreciated, thanks! Alec
-------------------- Won some things a while ago, now prevented from driving by school
Region: Northwest, Oregon
Car #: 79
Year : 90 Posts: 3336
Status: Offline
posted
Can't believe we didn't post this before, but...
Greg and I picked up two near-complete parts cars (one assembled, one disassembled) last month, so we've got tons of parts around. If anybody needs anything, just ask we've probably got it.
Examples from my Craiglist ad (some are street parts):
- Alternator - Radiator - A/C compressor and some other A/C parts - Power steering parts - ECU - Body parts including doors, nose, factory lightweight hood, rear bumper, RF fenders, side mirrors - Suspension parts (all) - Driveshafts (one crummy, one hopefully good) - Front brake calipers with new street pads - Misc interior pieces (no radio surround, sorry) - Factory intake system - Tail lights, side marker lights (no front parking lights left, sorry) - Front and rear subframes
Engines, transmissions and rearends are already spoken for.
-------------------- Crew Chief, 3D Racing #64, aka Team Scrappy 2.0 3rd place E2, 2009 25 Hours of Thunderhill
Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy E2 Champions, 2008 25 Hours of Thunderhill
Region: Oregon
Car #: u/a
Year : u/a Posts: 264
Status: Offline
posted
The silver #3 car is up for sale. 6 Race weekends on Rebello motor. Dyno #s are the best of the best as of 10 days ago. Car built from a 60k cream puff. Sticker Toyos and rains on ATS and Kazara wheels. Fresh set up. This is a no excuses car(unless you're me.) Car was built and set up by Pat McFall. Motor and maintenence by Sutherlands farm and feed. Only the best through out.
Region: Northwest, Oregon
Car #: 79
Year : 90 Posts: 3336
Status: Offline
posted
This will sound strange coming from the guy with eight metric tons of parts in his garage, but I need a left front parking/signal lens. The one from the parts car is gone and the SM needs one.
Danke-
-------------------- Crew Chief, 3D Racing #64, aka Team Scrappy 2.0 3rd place E2, 2009 25 Hours of Thunderhill
Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy E2 Champions, 2008 25 Hours of Thunderhill
Region: NWR
Car #: 32
Year : 91 Posts: 49
Status: Offline
posted
I've got another SM for the chopping block. Unfortuantely, due to school i dont have the budget or time for any racing this season.
the car is a '91 with only 5 race weekends on all spec race hardwear (suspension, diff, brakes. etc).
the details: Hard Dog .120 wall bolt in cage factory hard top freshened motor mazdaspeed diff 2 sets of wheels and dry tires 1 longblock 1 shortblock big fatty CSF radiator from ART
I'll add some more details later as well as some pics.
$9500 obo
-Adam 206.853.4443
-------------------- WWU Formula SAE Driving Team Captain
Region: Oregon
Car #: #67
Year : 1992 Posts: 634
Status: Offline
posted
Pat and other gentle people-
I need an odd part. the Brake booster and assemble for a '90-93. I think mine is not functioning correctly. If you have one or know where I can get one from a junker, I would apreicate it!
Thanks,
Jonny
-------------------- Oregon Region SM 67 Hershner & Bell Insurance Agency
Region: Northwest, Oregon
Car #: 79
Year : 90 Posts: 3336
Status: Offline
posted
quote:Originally posted by Jonny Davies: Pat and other gentle people-
I need an odd part. the Brake booster and assemble for a '90-93. I think mine is not functioning correctly. If you have one or know where I can get one from a junker, I would apreicate it!
Thanks,
Jonny
Gotcha covered good sir, I think we have two. We'll be sending some parts for Peter home with the Champion of the World soon anyway, so perhaps he can tote this as well.
I'll send you a PM.
-------------------- Crew Chief, 3D Racing #64, aka Team Scrappy 2.0 3rd place E2, 2009 25 Hours of Thunderhill
Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy E2 Champions, 2008 25 Hours of Thunderhill
Qik Nip
Loose Member '09 & '10 Great Lakes Regional Points Champion
Region: Cincinnati Great Lakes
Car #: 60
Year : 1990 Posts: 1487
Status: Offline
posted
quote:Originally posted by Fenn Bourland: I got some resonable Toyos and a coolsuit.
fB
How bout PM'ing me the price and details on the cool suit? Rick
-------------------- Fortune Cookie Racing SM 60 Directions for use: Race, Rumple, Repair ... Repeat!
Region: NW
Car #: 113
Year : 1990 Posts: 145
Status: Offline
posted
In need...finally figured out what's bent on 113. I'm looking for a left rear knuckle pref. with hub.
Anyone?
Thankfully I could still get the car reasonably set up, not thrilled with the camber but achieved zero tow, but the lower portion of the knuckle is defiantly tweaked, about 8mm out..
I'm running ICSCC at Mission this weekend, I'd love to be able to take one up there with me to switch out before the race on Sunday.
Region: NWR, OR
Car #: 30
Year : 1992 Posts: 8523
Status: Offline
posted
I'm assuming you're looking for a used part, which I don't have. I do however have a brand NEW part, bought by mistake, which I don't need (right now...). If you want to pick it up on the way to Mission (in Mukilteo WA), you could have it for 5% less than the Mazda price, and save the shipping too.
Region: Northwest, Oregon
Car #: 79
Year : 90 Posts: 3336
Status: Offline
posted
Those Miata Guys in Issaquah have added another acquisition, a nice red '92, 100% complete, with a very straight body.
See our ad in the Classifieds section, then let us know what you need! You know you want these bitchin' aftermarket "Ultra" wheels for your other Miata...
-------------------- Crew Chief, 3D Racing #64, aka Team Scrappy 2.0 3rd place E2, 2009 25 Hours of Thunderhill
Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy E2 Champions, 2008 25 Hours of Thunderhill
Region: Oregon
Car #: 68
Year : 91 Posts: 2359
Status: Offline
posted
Momo Start fiberglass seat mounted on original rails allows for adjustable seating positions. Also could be used as a passenger seat for instructor, etc.
-Bruce
-------------------- Bruce Wilson 2010 Oregon Region Champ 2010 Monte Shelton Driver of the Year 2010 25 Hours of Thunderhill E3 and Under 2 liter Overall Champion Oregon Region SM Class Advisor
Region: NW
Car #: 113
Year : 1990 Posts: 145
Status: Offline
posted
Anyone got any 4/32 tires looking for a good home? Preferably something with just a few heat cycles. The last conference race is coming up in Seattle at the end of the month, the rubber I have is pretty well done. And the budget for the year is blown. Hopefully next season will be more see more dollars on tires and fewer on bodywork!
Region: NWR
Car #: 77
Year : 1990 Posts: 24
Status: Offline
posted
Does anyone have a stock '94-'97 exhaust that they'd be willing to part with? I need the catback section, shoot me an email if you've got one - whiterex03 at hotmail.com. Thanks!
-------------------- Won some things a while ago, now prevented from driving by school
Region: Northwest, Oregon
Car #: 79
Year : 90 Posts: 3336
Status: Offline
posted
Andy, sorry to hear about your friend. I hope that situation turns out all right.
Everyone, Greg and I still have tons of good parts hanging around in my garage, and I'd love to get them sold! Examples:
- Factory red aluminum hood, near-perfect, just needs polishing. $200 - Factory red doors, again near-perfect, complete with manual windows and interior trim, $180 each. No mirrors though. If you just want the bare doors with none of the guts, we can do that too. - Bare drivers door, white, needs some love. $60 - Open diff, $225 - Any suspension or brake part you could want - Front and rear subframes - Steering rack - Etc. etc. etc.
I've also got a set of practice tires that are FREE if you come pick them up! We've gotta have a Seattle newbie or two who could use some free tires!
-------------------- Crew Chief, 3D Racing #64, aka Team Scrappy 2.0 3rd place E2, 2009 25 Hours of Thunderhill
Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy E2 Champions, 2008 25 Hours of Thunderhill
Region: socal
Year : 1991 Posts: 396
Status: Offline
posted
I am looking for a 94+ diff housing and axels. I bought a torsen and th ehousing is cracked no other damage thankfully. I pulled it from a junk yard. Someone already got the axels.
Region: Oregon
Car #: 80
Year : 93 Posts: 602
Status: Offline
posted
The '93 black parts car with 79k miles is gone now but I've still got the following items left that are taking up space:
Black right front fender, perfect and glossy paint Black aluminum hood, two small minor dents but paint good Black front headlight buckets, good shape both rear lower control arms 5 spd transmission from this car with only 79k miles Drive shaft from this car Header, down pipe, and cat all 1.6l parts complete short block motor from another car w/130k miles, cylindar walls look good, bolt on your head and go or rebuildable core
Send me a PM or email at geoff_cochran at hotmail.com for pics and crazy cheap pricing. Wouldn't a headlight bucket look good under the Christmas tree?
Region: NW
Car #: 113
Year : 1990 Posts: 145
Status: Offline
posted
Managed to dig up a reasonable short block locally, put it all back together and it fired first time....for about 1 second
Somehow, some way - not really a clue how, I managed to crack - quite severely the intake manifold. And failed to notice until the whole thing was reinstalled in the car... (another great day of Robottom mechanics)
Region: NWR
Car #: 47/479
Year : 1992 Posts: 418
Status: Offline
posted
FS: New, but painted, 99+ Chin Lip + Install Kit (from MS) - NC10-V4-900F FRONT AIRDAM, PRIMER
I'm an extra special kind of idiot that misread things and ordered a 99+ chin lip for his NA. Not only that, I then rattlecanned it red before holding it up to the front bumper and going "oh, this doesn't even remotely fit". After checking part #s, I realized my mistake, but I now have a brand new, rattlecanned red, 99+ chin lip with install kit. It was 160$ from MS a week ago. Any offers?
Region: Northwest, Oregon
Car #: 79
Year : 90 Posts: 3336
Status: Offline
posted
Hey y'all, a buddy of mine from work just bought a cheap '94 with hardtop to make into a track car (not for SM, yet). His most immediate need is for wheels and tires- the car came with 13x8s. (!!!)
Anybody have some cheap, good looking 14 or 15-inch wheels, preferably with decent tires? Looking to sell your spare set of not-too-hammered wheels with Toyo rains?
-------------------- Crew Chief, 3D Racing #64, aka Team Scrappy 2.0 3rd place E2, 2009 25 Hours of Thunderhill
Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy E2 Champions, 2008 25 Hours of Thunderhill