Spec Miata Community Post New Topic  Post A Reply
search | help | calendar | games | forum home

  next oldest topic   next newest topic
» Hello Spec Miata Community » SpecMiata.com » Spec Miata Virtual Swap Meet » NW virtual swap meet (Page 5)

 - Email this page to someone! | Subscribe To Topic
Page 5 of 6 1  2  3  4  5  6  next » 
 
Author Topic: NW virtual swap meet
Jim Boemler Verified Driver
Veteran Member

Region: NWR, OR
Car #: 30
Year : 1992
Posts: 8523
Status: Offline
Icon 1 posted  Profile for Jim Boemler     Edit/Delete Post  Report this post to a Moderator

From anyone else that would be good support, Ken, but we both know you're blind as a bat.

jim

--------------------
Just a clown

Team Cochran Verified Driver Made Donation to Website
Member For Rent

Region: Oregon
Car #: 80
Year : 93
Posts: 602
Status: Offline
Icon 1 posted  Profile for Team Cochran     Edit/Delete Post  Report this post to a Moderator

I'm looking to buy an old set of full tread rains if you have some you'd like to get rid of.

Also, I've still got the following up for grabs:
1.6l short block with 130k
1.6l stock header, no cracks

PM or email geoff_cochran at hotmail dot com.

[ 04-27-2007, 06:52 PM: Message edited by: Team Cochran ]

--------------------
Geoff
SM 80

Kevin Brinkley Verified Driver Made Donation to Website
Member

Region: Oregon
Car #: 81
Year : 1993
Posts: 79
Status: Offline
Icon 1 posted  Profile for Kevin Brinkley     Edit/Delete Post  Report this post to a Moderator

I've still got a few things available:

3 Maxon 5 watt radios with car/helment wiring, car antenna, charger, and spare batteries
1 set of Kazerra wheels w 3 heat cycle drys
1 set of Kazerra wheels w ancient drys
1 set of 90-93 14" 7 spoke stock wheels
Left and Right Front Hubs , Spindles, Lower Ball Joints, and Tie Rod Ends
Front calipers
ART Blueprinted Hub (New)
Fuel Pump (New)
Fuel Strainer (New)
O2 Sensor
Cam Angle Sensor
Stock PP and Clutch
Centerforce PP w Exedy Clutch
Lightweight PP and Clutch (not legal for SM)
AFM
Driveline
Down pipe (exterior beat up but still gets the job done)
Turbo Tuff Exhaust setup w extra Laguna muffler
Small nitrogen bottle
2 Rolling Engine Stands
2 10x10 EZ Up Canopies
4 Square 5 gal gas cans

PM or email at kmbrinkley@comcast.net

Pat Newton Verified Driver Made Donation to Website
Enduro addict

Region: Northwest, Oregon
Car #: 79
Year : 90
Posts: 3336
Status: Offline
Icon 1 posted  Profile for Pat Newton   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

I want the gas cans and an engine stand Kevin! Can you send me a pic of the engine stand?

Are the stock hubs, balljoints and tie rod ends new, or used?

Thanks,

Pat

--------------------
Crew Chief, 3D Racing #64, aka Team Scrappy 2.0
3rd place E2, 2009 25 Hours of Thunderhill

Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy
E2 Champions, 2008 25 Hours of Thunderhill

Subdued Verified Driver
NCW

Region: NWR/OR
Car #: Was #11
Year : Was a '99
Posts: 194
Status: Offline
Icon 1 posted  Profile for Subdued     Edit/Delete Post  Report this post to a Moderator

Email sent.

--------------------
Ed

Andy Robottom Verified Driver
Member

Region: NW
Car #: 113
Year : 1990
Posts: 145
Status: Offline
Icon 1 posted  Profile for Andy Robottom     Edit/Delete Post  Report this post to a Moderator

I have a couple of spare heads, no history, all the parts, in need of reconstruction.

2 sets of OEM steel wheels one with a new set of cheap and cheerful radials.

Stock airbox.

Stock exhaust system, minus cat


Anyone interested?

Andy

--------------------
....drive your own line

Andy Robottom Verified Driver
Member

Region: NW
Car #: 113
Year : 1990
Posts: 145
Status: Offline
Icon 1 posted  Profile for Andy Robottom     Edit/Delete Post  Report this post to a Moderator

Still on the look out for SM set up shocks/springs and sway bars.....

Andy

[ 04-28-2007, 12:17 PM: Message edited by: Andymr113 ]

--------------------
....drive your own line

Kevin Brinkley Verified Driver Made Donation to Website
Member

Region: Oregon
Car #: 81
Year : 1993
Posts: 79
Status: Offline
Icon 1 posted  Profile for Kevin Brinkley     Edit/Delete Post  Report this post to a Moderator

Here's what's left. Also, added a trailer, HANS and a stud welder/uni-spotter to the list too.

14 ft flatbed trailer with tire rack. Miata doors clear fenders..no climbing in/out the window.
H&S Uni-Spotter 4500 stud welder with slide hammer, stud tip and welding studs.

3 Maxon 5 watt radios with car/helment wiring, car antenna, charger, and spare batteries
1 set of Kazerra wheels w old drys
1 set of 90-93 14" 7 spoke stock wheels
Left and Right Front Hubs , Spindles, Lower Ball Joints, and Tie Rod Ends
Front calipers
Fuel Pump (New)
Fuel Strainer (New)
O2 Sensor
Stock PP and Clutch
Centerforce PP w Exedy Clutch
Lightweight PP and Clutch (not legal for SM)
AFM
Driveline
Down pipe (exterior beat up but still gets the job done)
Turbo Tuff Exhaust setup w extra Laguna muffler
Small nitrogen bottle

Kevin

[ 05-02-2007, 01:52 PM: Message edited by: Kevin Brinkley ]

Will Schrader Verified Driver Made Donation to Website
Member

Region: oregon
Car #: 41
Year : 1990
Posts: 61
Status: Offline
Icon 1 posted  Profile for Will Schrader     Edit/Delete Post  Report this post to a Moderator

I have a blue hard top,the light one without any padding or defrost....900.00

A pair of real nice upper control arms...75.00 each.
A pair of stock seats,good shape...make offer.
Will at 503 720 3762

Kevin Brinkley Verified Driver Made Donation to Website
Member

Region: Oregon
Car #: 81
Year : 1993
Posts: 79
Status: Offline
Icon 1 posted  Profile for Kevin Brinkley     Edit/Delete Post  Report this post to a Moderator

More goodies...

Longacre 24v 1/2 drive impact gun used 1 weekend
Harbor Freight 19v 1/2 drive impact gun 3 years old
EST-65 Infrared Laser Temperature Gun. Up to 1022 degrees
Intercomp Air Density Gauge

Kevin
kmbrinkley@comcast.net

[ 05-02-2007, 05:42 PM: Message edited by: Kevin Brinkley ]

Will Schrader Verified Driver Made Donation to Website
Member

Region: oregon
Car #: 41
Year : 1990
Posts: 61
Status: Offline
Icon 1 posted  Profile for Will Schrader     Edit/Delete Post  Report this post to a Moderator

I have a real nice flywheel that weighs exactly 17.6 lbs. ready to use.Will 503 720 3762

Team Cochran Verified Driver Made Donation to Website
Member For Rent

Region: Oregon
Car #: 80
Year : 93
Posts: 602
Status: Offline
Icon 1 posted  Profile for Team Cochran     Edit/Delete Post  Report this post to a Moderator

Will you should put that one in the car and take out that aluminum flywheel! [yep]

--------------------
Geoff
SM 80

Kevin Brinkley Verified Driver Made Donation to Website
Member

Region: Oregon
Car #: 81
Year : 1993
Posts: 79
Status: Offline
Icon 1 posted  Profile for Kevin Brinkley     Edit/Delete Post  Report this post to a Moderator

An updated list...

Parts/Spares/etc:

1 set of 90-93 14" 7 spoke stock wheels
PFC 97 Rear Pads (New)
Clutch Slave Cylinder
Brake Master Cylinder
Complete Thermostat Housing
O2 Sensor
Springfield Dyno Exhaust Tail Section
3 used front hubs
5 front rotors...2 with min run out
2 rear rotors
Grab bag of a-arm cam bolts...new and old style.
Stock PP and Clutch
Centerforce PP w Exedy Clutch
AFM (unmodified)
Driveline
Down pipe (exterior beat up but still gets the job done)
Fuel filler neck and cap

Tools/Misc:

Spark Plug Magnifying Flashlight
Longacre Liquid Filled Tire Gauge
Hot Lap Timer with Transmitter
10K lb ratchet tie downs w 2 axle straps
Longacre 24v 1/2 drive impact gun used 1 weekend
Harbor Freight 19v 1/2 drive impact gun 3 years old
Intercomp Air Density Gauge
Small Nitrogen Bottle
1 gal Swepco 201 Gear Lube
1 qt Redline MTL
2 qt Redline Lightweight Shockproof

Kevin
kmbrinkley@comcast.net

[ 05-09-2007, 09:23 AM: Message edited by: Kevin Brinkley ]

Jonny Davies Verified Driver Made Donation to Website
Veteran Member

Region: Oregon
Car #: #67
Year : 1992
Posts: 634
Status: Offline
Icon 1 posted  Profile for Jonny Davies     Edit/Delete Post  Report this post to a Moderator

Kevin- I'll take a few small items.

As for the rest of you...I've got:
A set of LongAcre tow plates $25
and
7pc ratcheting flex head wrenchs, brand new. One set Metric and one set standard. (x-mas present, already have them:))

Jonny@davies-family.com

Subdued Verified Driver
NCW

Region: NWR/OR
Car #: Was #11
Year : Was a '99
Posts: 194
Status: Offline
Icon 1 posted  Profile for Subdued     Edit/Delete Post  Report this post to a Moderator

I will take those toe plates.

Ed

Neil Made Donation to Website
Ugly Trailer Racing

Region: NWR
Car #: 54 where are you?
Year : 89 rx7 GTUs
Posts: 408
Status: Offline
Icon 4 posted  Profile for Neil     Edit/Delete Post  Report this post to a Moderator

Making some stock room changes at Pinnacle and an inventory shuffle soooo.....
It's easier if it's sold. [Smash] If you were thinking about that exhaust piece, intake, topp brackets, redline oil, EBC brakes, racetech seat, harness, OEM parts etc... now's the time. Strictly limited to on hand; deeper discount than even your SCCA deal.
I will be gone thursday and friday and stumbling in late Monday morning from the Laguna Seca road trip. [Sleep] So contact me Wednesday or next week. Take advantage of the timing. [thumbsup]

--------------------
"I am master of my unspoken words and slave to those that should have remained unsaid." Abe Lincoln

Alec
Member

Region: NWR
Car #: 77
Year : 1990
Posts: 24
Status: Offline
Icon 1 posted  Profile for Alec     Edit/Delete Post  Report this post to a Moderator

Does anyone have a spare passenger side mirror they'd be willing to part with? Apparently the junkyard in Marysville thinks that miata mirrors are made of gold and has priced them accordingly. Thanks!

--------------------
Won some things a while ago, now prevented from driving by school

Pat Newton Verified Driver Made Donation to Website
Enduro addict

Region: Northwest, Oregon
Car #: 79
Year : 90
Posts: 3336
Status: Offline
Icon 1 posted  Profile for Pat Newton   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

The junkyard in Marysville thinks all Miata parts are made of gold. If nobody here has one, try Jeff Clark in Puyallup or Coop's Miata in Maple Valley.

--------------------
Crew Chief, 3D Racing #64, aka Team Scrappy 2.0
3rd place E2, 2009 25 Hours of Thunderhill

Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy
E2 Champions, 2008 25 Hours of Thunderhill

Neil Made Donation to Website
Ugly Trailer Racing

Region: NWR
Car #: 54 where are you?
Year : 89 rx7 GTUs
Posts: 408
Status: Offline
Icon 1 posted  Profile for Neil     Edit/Delete Post  Report this post to a Moderator

quote:
Originally posted by Alec:
Does anyone have a spare passenger side mirror they'd be willing to part with? Apparently the junkyard in Marysville thinks that miata mirrors are made of gold and has priced them accordingly. Thanks!

Well if you get nowhere, with your SCCA discount mine are only made of silver! [Big Grin] and they should even be painted the right color! I show usually about $100 your price instead of 125-140. [Cool]

--------------------
"I am master of my unspoken words and slave to those that should have remained unsaid." Abe Lincoln

Neil Made Donation to Website
Ugly Trailer Racing

Region: NWR
Car #: 54 where are you?
Year : 89 rx7 GTUs
Posts: 408
Status: Offline
Icon 1 posted  Profile for Neil     Edit/Delete Post  Report this post to a Moderator

Jeff Clark has corrected me and says mine are made of Platinum! [Roll Eyes]
At least mine are new and haven't touched a wall, traffic can or another competitor...yet! [fight]

--------------------
"I am master of my unspoken words and slave to those that should have remained unsaid." Abe Lincoln

John Wymore
Member

Region: Oregon
Posts: 225
Status: Offline
Icon 1 posted  Profile for John Wymore     Edit/Delete Post  Report this post to a Moderator

quote:
Originally posted by Alec:
Does anyone have a spare passenger side mirror they'd be willing to part with? Apparently the junkyard in Marysville thinks that miata mirrors are made of gold and has priced them accordingly. Thanks!

I have a red one off a 1990 I'll give you.

Alec
Member

Region: NWR
Car #: 77
Year : 1990
Posts: 24
Status: Offline
Icon 1 posted  Profile for Alec     Edit/Delete Post  Report this post to a Moderator

Found one already, even the right color! Thanks though-

--------------------
Won some things a while ago, now prevented from driving by school

Fenn Bourland Verified Driver
Member

Region: Oregon
Car #: u/a
Year : u/a
Posts: 264
Status: Offline
Icon 1 posted  Profile for Fenn Bourland     Edit/Delete Post  Report this post to a Moderator

I need another set of wheels ASAP.
Prefer Kazarras but beggers ...

fB

Jim Boemler Verified Driver
Veteran Member

Region: NWR, OR
Car #: 30
Year : 1992
Posts: 8523
Status: Offline
Icon 1 posted  Profile for Jim Boemler     Edit/Delete Post  Report this post to a Moderator

I'm gonna need a PR-1, 35mm, in anthracite. OR, maybe I'll have three for sale. [Frown]

jim

--------------------
Just a clown

Kevin Brinkley Verified Driver Made Donation to Website
Member

Region: Oregon
Car #: 81
Year : 1993
Posts: 79
Status: Offline
Icon 1 posted  Profile for Kevin Brinkley     Edit/Delete Post  Report this post to a Moderator

Ok, I really want this stuff out of my garage...make me an offer.

In case you don't already know, the stock wheels are a must have if you're doing your own alignments...at least for toe and camber. That is, you need straight rims. And, we all know that most of you might only have 1 or 2 of those. [Wink]

Parts/Spares/etc:

1 set of 90-93 14" 7 spoke stock wheels
PFC 97 Rear Pads (New)
Clutch Slave Cylinder
Brake Master Cylinder
Complete Thermostat Housing
O2 Sensor
Springfield Dyno Exhaust Tail Section
3 used front hubs
5 front rotors...2 with min run out
2 rear rotors
Grab bag of a-arm cam bolts...new and old style.
Stock PP and Clutch
Centerforce PP w Exedy Clutch
AFM
Driveline
Down pipe (exterior beat up but still gets the job done)
Fuel filler neck and cap

Tools/Misc:

Spark Plug Magnifying Flashlight
Longacre Liquid Filled Tire Gauge
Hot Lap Timer with Transmitter
10K lb ratchet tie downs w 2 axle straps
Longacre 24v 1/2 drive impact gun used 1 weekend
Intercomp Air Density Gauge
Small Nitrogen Bottle
1 gal Swepco 201 Gear Lube
1 qt Redline MTL
2 qt Redline Lightweight Shockproof

Kevin
kmbrinkley@comcast.net

Peter Lovejoy Verified Driver Made Donation to Website
Member

Region: OR/WA
Posts: 301
Status: Offline
Icon 1 posted  Profile for Peter Lovejoy     Edit/Delete Post  Report this post to a Moderator

I've got a set of ART transmission tools I'll sell for $100.

Peter

Pat Newton Verified Driver Made Donation to Website
Enduro addict

Region: Northwest, Oregon
Car #: 79
Year : 90
Posts: 3336
Status: Offline
Icon 1 posted  Profile for Pat Newton   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

Buddy of mine from my street Miata group sold his car and is selling a set of TD 1.2s and Toyos with a couple track days on them.

http://seattle.craigslist.org/est/pts/342454955.html

--------------------
Crew Chief, 3D Racing #64, aka Team Scrappy 2.0
3rd place E2, 2009 25 Hours of Thunderhill

Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy
E2 Champions, 2008 25 Hours of Thunderhill

geoff Verified Driver
Member

Region: Oregon
Car #: #9
Year : 1990
Posts: 63
Status: Offline
Icon 1 posted  Profile for geoff     Edit/Delete Post  Report this post to a Moderator

Here are a few things I have left:

Early '90 cylinder head (popular candidate for pro motor build, flows better than newer heads)
Early '90 bottom end parts minus a broken crankshaft (disassembled)
Brake booster
Rebuilt brake master cylinder
Mazdacomp exhaust
Custom exhaust (magnaflow muffler)
Racing Beat air intake with filter

Make me an offer.

Geoff Odoms

Neil Made Donation to Website
Ugly Trailer Racing

Region: NWR
Car #: 54 where are you?
Year : 89 rx7 GTUs
Posts: 408
Status: Offline
Icon 14 posted  Profile for Neil     Edit/Delete Post  Report this post to a Moderator

One specific item of note, in our inventory shuffle, for any racers considering a new seat. [Smash]
We have a RACETECH Demo model that has been on display and demo'd in a couple cars. This less than cost price will include extra cushions (one= memory foam seat!), brackets and possible delivery. [yep]
The seat is the 4009W (for those of us with a moderate plus frame)this does not have the head restraint Halo.
This can be made to be quite comfortable, especially with the extra cusions in different sizes and is one of the safest seats available. At this price someone will score big!
$630.00 [yep] one only, have notified the rotor heads, too. First come, first serve. he who hesitates..well.. [banghead]

--------------------
"I am master of my unspoken words and slave to those that should have remained unsaid." Abe Lincoln

Pat Newton Verified Driver Made Donation to Website
Enduro addict

Region: Northwest, Oregon
Car #: 79
Year : 90
Posts: 3336
Status: Offline
Icon 1 posted  Profile for Pat Newton   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

quote:
Originally posted by Neil:
We have a RACETECH Demo model that has been on display and demo'd in a couple cars.

And also might have had just a touch of soft taco goop spilled on it at Pacific Raceways. [blush] [duck] [Big Grin]

Cleaned up promptly, of course.

--------------------
Crew Chief, 3D Racing #64, aka Team Scrappy 2.0
3rd place E2, 2009 25 Hours of Thunderhill

Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy
E2 Champions, 2008 25 Hours of Thunderhill

Neil Made Donation to Website
Ugly Trailer Racing

Region: NWR
Car #: 54 where are you?
Year : 89 rx7 GTUs
Posts: 408
Status: Offline
Icon 12 posted  Profile for Neil     Edit/Delete Post  Report this post to a Moderator

quote:
Originally posted by Pat Newton:
quote:
Originally posted by Neil:
We have a RACETECH Demo model that has been on display and demo'd in a couple cars.

And also might have had just a touch of soft taco goop spilled on it at Pacific Raceways. [blush] [duck] [Big Grin]

Cleaned up promptly, of course.

[rolling on floor laughin]
Acually, THAT one is back in the RX7. That might explain my greater than normal desire for Tacos recently! [tipsy]

--------------------
"I am master of my unspoken words and slave to those that should have remained unsaid." Abe Lincoln

Jason Brassfield Verified Driver
Member

Region: oregon
Year : 1991
Posts: 32
Status: Offline
Icon 1 posted  Profile for Jason Brassfield     Edit/Delete Post  Report this post to a Moderator

I need a hood, red would be best but anything will do. Maztoy has a few, but they wont ship to Salem and getting up there during the week is about impossible for me with my work schedule.

Will Schrader Verified Driver Made Donation to Website
Member

Region: oregon
Car #: 41
Year : 1990
Posts: 61
Status: Offline
Icon 1 posted  Profile for Will Schrader     Edit/Delete Post  Report this post to a Moderator

I can pick up your hood for you,I know those guys at Maztoy and I will be going right by there on Monday.Give me a call
Will Schrader
home 503 772 3364
cell 503 720 3762
work 503 653 8081

B Wilson Verified Driver Series Champ
Gold Member

Region: Oregon
Car #: 68
Year : 91
Posts: 2359
Status: Offline
Icon 1 posted  Profile for B Wilson   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

Make sure it's an aluminum hood. When I first built my car, it came with an aftermarket steel hood -- weighs about 50 lb's more than the OEM's. I might be exagerating a bit, but it felt like it weighed a ton [Smile]

-Bruce

--------------------
Bruce Wilson
2010 Oregon Region Champ
2010 Monte Shelton Driver of the Year
2010 25 Hours of Thunderhill E3 and Under 2 liter Overall Champion
Oregon Region SM Class Advisor

Donn Snyder
Junior Member

Region: Oregon
Car #: 71
SMIM: ??
Posts: 4
Status: Offline
Icon 1 posted  Profile for Donn Snyder     Edit/Delete Post  Report this post to a Moderator

I am looking for an aftermarket exhaust from the down pipe back for my 90 street car. My stock cat disintegrated and all the parts are floating around in the muffler. Must be fairly quiet as this is a daily driver for me but I am looking for a little more noise than the stock one and a lot less back pressure.
Donn Snyder

B Wilson Verified Driver Series Champ
Gold Member

Region: Oregon
Car #: 68
Year : 91
Posts: 2359
Status: Offline
Icon 1 posted  Profile for B Wilson   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

I have a Mazdaspeed exhaust (quiet) - Gone

Also available:

BSI straight exhaust (loud) - Gone

37mm Koyo Radiator (2 seasons).

-Bruce

[ 06-28-2007, 01:07 PM: Message edited by: Bruce Wilson ]

--------------------
Bruce Wilson
2010 Oregon Region Champ
2010 Monte Shelton Driver of the Year
2010 25 Hours of Thunderhill E3 and Under 2 liter Overall Champion
Oregon Region SM Class Advisor

Donn Snyder
Junior Member

Region: Oregon
Car #: 71
SMIM: ??
Posts: 4
Status: Offline
Icon 1 posted  Profile for Donn Snyder     Edit/Delete Post  Report this post to a Moderator

I might be interested in the Mazdapeed setup.
How much do you want for it and what is the condition? You can e-mail me at Donn@onboardsystems.com

Peter Lovejoy Verified Driver Made Donation to Website
Member

Region: OR/WA
Posts: 301
Status: Offline
Icon 1 posted  Profile for Peter Lovejoy     Edit/Delete Post  Report this post to a Moderator

I have a brand new 1.6L cat replacement tube still wrapped in plastic. PM me.

Peter

JimEli Verified Driver Made Donation to Website
Member

Region: NWR
Car #: 5
Year : 1991
Posts: 252
Status: Offline
Icon 1 posted  Profile for JimEli   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

Starting a new SM build from a 1991 donor. Need everything except advice regarding the idiocy of buying vs. building. Iím currently requesting leads on a hardtop, but will entertain any new or hand-me-down item offered for sale.

I currently reside in the great northwest.

[ 07-02-2007, 03:02 PM: Message edited by: JimEli ]

--------------------
UPR.com
Team LemonLappers

Pat Newton Verified Driver Made Donation to Website
Enduro addict

Region: Northwest, Oregon
Car #: 79
Year : 90
Posts: 3336
Status: Offline
Icon 1 posted  Profile for Pat Newton   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

Hey Jim, a buddy of mine here (Seattle area) is selling a set of SM-sized Toyos and wheels with two track days on them. He's at nathan_ramsey at comcast dot net.

For my part, I need the following:

- Front bumper cover, red (might need some of the underpinnings too)
- Left front parking light/blinker assembly
- LF fender, red
- LF lower control arm, please deliver to Geoff Cochran and bill me [Big Grin]

--------------------
Crew Chief, 3D Racing #64, aka Team Scrappy 2.0
3rd place E2, 2009 25 Hours of Thunderhill

Crew Chief, EGR/Miller Motorsports #64, aka Team Scrappy
E2 Champions, 2008 25 Hours of Thunderhill

Andy Robottom Verified Driver
Member

Region: NW
Car #: 113
Year : 1990
Posts: 145
Status: Offline
Icon 1 posted  Profile for Andy Robottom     Edit/Delete Post  Report this post to a Moderator

My shopping list - thus far.

Trunk Lid
Rear bumper
Rear facia (plastic bit between the rear lights)
Right Rear tail light cluster
Maybe - rear right quarter

Color - any

Apart from kissing the concrete - had a great time this weekend, thanks to Ken S and all for your continued support and encouragement.

Andy

--------------------
....drive your own line

Kris Carson
Member

Region: North Pacific
Car #: #28
Year : 1992
Posts: 17
Status: Offline
Icon 1 posted  Profile for Kris Carson     Edit/Delete Post  Report this post to a Moderator

I have some "stuff" that needs to go.

4-Kosei wheels-great condition
4-ATS-silver wheels-very good condition
1-1.6 head from Will Schrader's car (when I bought it back from him, long story) great condition and fast.
1-Blown motor with a BSI head (paid 1800.00), cam good and misc. parts and literally pieces (Block grenaded and oil fire at green flag at PIR in May).
1-14/15 inch Kirky seat, blue-great condition.
1-AFM from ART, waiting for return from Karl.
8-tires that would be good for new driver practice.
1-straight shot intake from Hernandez.
1-unassembled trans with polished gears (BSI).

It's good to see the usual suspects are still around, I have been out of the loop. Running CSM in Conference playing with Bockman and friends.
Other misc. parts and pieces, please feel free to call cell# 253-906-7439.
Kris Carson

B Wilson Verified Driver Series Champ
Gold Member

Region: Oregon
Car #: 68
Year : 91
Posts: 2359
Status: Offline
Icon 1 posted  Profile for B Wilson   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

Sorry I haven't had a chance to look under the house yet, but I think I have a rear bumper, rear boot (that's a trunk Andy [Smile] ) lid and rear facia.

I'll check tonight.

-Bruce

--------------------
Bruce Wilson
2010 Oregon Region Champ
2010 Monte Shelton Driver of the Year
2010 25 Hours of Thunderhill E3 and Under 2 liter Overall Champion
Oregon Region SM Class Advisor

Andy Robottom Verified Driver
Member

Region: NW
Car #: 113
Year : 1990
Posts: 145
Status: Offline
Icon 1 posted  Profile for Andy Robottom     Edit/Delete Post  Report this post to a Moderator

Outstanding! - Thanks Bruce.

PM me or call my cell 971 226 7459 if you have any luck digging under the house.

I'm rather keen to get started. Got the car the straightline autobody yesterday. Kevin Culver (he did the paint job) reckons he can pull most of it out. T minus 9 days till I'm scheduled to pull up to Spokane.

Andy

--------------------
....drive your own line

Carl Hatfield Verified Driver
Member

Region: NWR, Oregon, ICSCC
Car #: 75
Year : 1991
Posts: 611
Status: Offline
Icon 1 posted  Profile for Carl Hatfield   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

Here is my shopping list-

Front and rear subframes
RR quarter panel
RR control arms and upright
Front and rear hubs (1 each)
Probably front control arms (both sides)
Probably front and rear bumper covers

My seat is pretty bent - does anyone have any experience trying to straighten an aluminum Ultra Shield seat? If I can't bend it back, I may be interested in your seat, Kris.

jatterbu Verified Driver
Member

SMIM: AIM: advanwrx86
Posts: 195
Status: Offline
Icon 1 posted  Profile for jatterbu   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

quote:
Originally posted by Kris Carson:
I have some "stuff" that needs to go.

4-Kosei wheels-great condition
4-ATS-silver wheels-very good condition
1-1.6 head from Will Schrader's car (when I bought it back from him, long story) great condition and fast.
1-Blown motor with a BSI head (paid 1800.00), cam good and misc. parts and literally pieces (Block grenaded and oil fire at green flag at PIR in May).
1-14/15 inch Kirky seat, blue-great condition.
1-AFM from ART, waiting for return from Karl.
8-tires that would be good for new driver practice.
1-straight shot intake from Hernandez.
1-unassembled trans with polished gears (BSI).

It's good to see the usual suspects are still around, I have been out of the loop. Running CSM in Conference playing with Bockman and friends.
Other misc. parts and pieces, please feel free to call cell# 253-906-7439.
Kris Carson

Kris,

How much do you want for the Kosei's and the ATS? I PM'd you earlier today about the Kosei's, just let me know what you are looking to get for them and we might be able to work something out [Smile]

Joey

--------------------
Joey
Car #69
White and Red
http://www.joeyatterbury.com

Greg Bush Verified Driver
Thread Killer

Region: NW/OR
Car #: 04
Year : 90
Posts: 1765
Status: Offline
Icon 1 posted  Profile for Greg Bush     Edit/Delete Post  Report this post to a Moderator

Karl,

I have front and rear uprights for you, cheap.

They have hubs in them but they might be rusty. I had meant to pull the front and repack it, then I'll know for sure if its good. I'd replace the rear.

Greg

Donn Snyder
Junior Member

Region: Oregon
Car #: 71
SMIM: ??
Posts: 4
Status: Offline
Icon 1 posted  Profile for Donn Snyder     Edit/Delete Post  Report this post to a Moderator

I am looking for a ultrashield spec miata seat or similar in 15 1/2 or 16 inch size. Must have padding and no wrap around chest things as I want to use in my street car and be resonably easy to get in and out of.
I also might be interested in last years cold air intake if the price is right such as under $100 for a Racing Beat.
Thanks, Donn Snyder

B Wilson Verified Driver Series Champ
Gold Member

Region: Oregon
Car #: 68
Year : 91
Posts: 2359
Status: Offline
Icon 1 posted  Profile for B Wilson   Author's Homepage     Edit/Delete Post  Report this post to a Moderator

Racing Beat intake here

-Bruce

--------------------
Bruce Wilson
2010 Oregon Region Champ
2010 Monte Shelton Driver of the Year
2010 25 Hours of Thunderhill E3 and Under 2 liter Overall Champion
Oregon Region SM Class Advisor

Alec
Member

Region: NWR
Car #: 77
Year : 1990
Posts: 24
Status: Offline
Icon 1 posted  Profile for Alec     Edit/Delete Post  Report this post to a Moderator

Anyone have a rear bumper they'd be willing to sell? My mother had a little too much fun with my new project at PIR the other day. any help would be appreciated, thanks!
Alec

--------------------
Won some things a while ago, now prevented from driving by school

 
Page 5 of 6 1  2  3  4  5  6  next » 
 

Quick Reply
Message:

Icon 1
  Icon 1     Icon 2     Icon 3     Icon 4     Icon 5     Icon 6     Icon 7  
  Icon 8     Icon 9     Icon 10     Icon 11     Icon 12     Icon 13     Icon 14  
  Icon 15     Icon 16     Icon 17     Icon 18     Icon 19     Icon 20     Icon 23  
  Icon 24     Icon 25     Icon 26     Icon 27      

HTML is enabled.
UBB Codeô is enabled.

Instant Graemlins

Upload File Form
   


Post New Topic  Post A Reply Close Topic   Feature Topic   Move Topic   Delete Topic next oldest topic   next newest topic
 - Printer-friendly view of this topic | Subscribe To Topic
Hop To: